Search for gluinos with ATLAS at LHC

Prospects for ATLAS observation of a SUSY-like signal from two gluinos are investigated within a certain region of the mSUGRA parameter space, where the cross section of the two gluinos production via gluon-gluon fusion is estimated at a rather high level of 13 pb. The event selection trigger uses a very clear signature of the process (4 jets + 4 muons + up to 4 secondary vertices topology) when final decay products of each gluino are b-anti-b and muon-anti-muon pairs and the lightest SUSY particle, the neutralino. Rather high transverse missing energy carried away by two neutralinos is an essential signature of the event and also allows the relevant Standard Model background to be reduced significantly. The generation and reconstruction processes are performed by means of the ATLAS common software framework ATHENA.Comment: LaTeX, 9 pages, 7 eps figure

Pion Energy Reconstruction by the Local Hadronic Calibration Method with ATLAS Combined Test Beam 2004 data

The pion energy reconstruction by the local hadronic calibration method on the basis of the 2004 combined test beam data in the energy range 10 -- 350 GeV and $\eta = 0.25$ is performed. In this method energies deposited in each cell are weighted. The weights are determined by the Monte Carlo simulation using Calibration Hits software. We have modified this method by applying cuts in weights. The obtained fractional energy resolution with the conventional method of determination of the energy deposit in the dead material between LAr and Tile calorimeters is $\sigma/E = (67\pm2)\%/\sqrt{E} \oplus (3.9\pm0.2)\% \oplus (95\pm22)\%/E$. This is about 1.5 times better than the results for the hadronic calibration method obtained by the Oxford-Stockholm group and slightly better than the H1 method results for CTB04 obtained by Pisa group. The energy linearity is within $\pm$1\%. We have determined the general normalization constant of 0.91 for which the mean value linearity for the weight cut of 1.05 is about 1. At using this normalization constant the energy resolution has not worsen. We have corrected the cesium miscalibration of the $Tile_1$ and $Tile_2$ longitudinal samplings. The mean value of energy linearity has been increased by about 1\% and becomes equal to 1.002$\pm$0.002. The energy resolution did not change. We have performed weighting without knowing of the beam energies. For this the special procedure has been developed. In this case the energy resolution shows 9\% degradation. Linearities are within $\pm$1\%. We have applied the Neural Networks to the determination of the energy deposit between LAr and Tile calorimeters. The essential improvement of energy resolution is obtained. In this case we have reached the projected energy resolution for hadrons in the ATLAS detector $\sigma/E = 50\%/\sqrt{E} \oplus 3\%$

Study of TileCal Sampling Fraction for Improvement of Monte-Carlo Data Reconstruction

In this work we made a detailed calculation of Tile Calorimeter Sampling Fraction parameter (TSF) using single electron and pion Geant4 Monte-Carlo simulation of ATLAS hadronic calorimeter (TileCal) within ATHENA --- common software framework of ATLAS. Our study was based on MC Truth data provided by special Geant4 MC simulation objects --- Calibration Hits, design which was implemented in TileCal simulation by our group. We used this TSF value for reconstruction of TileCal single pions simulation data. It was done for ATLAS Combined test beam 2004 (CTB2004) configuration setup. Results of the reconstruction were compared with MC Truth and CTB2004 reconstructed experimental data. Good agreement between them shows quite evident improvement in TileCal MC data reconstruction of hadronic shower energy in electromagnetic scale

Artificial Neural Networks for reconstruction of energy losses in dead materials between barrel LAr and Tile calorimeters: exploration and results

In the course of computational experiments with Monte-Carlo events for ATLAS Combined Test Beam 2004 setup Artificial Neural Networks (ANN) technique was applied for reconstruction of energy losses in dead materials between barrel LAr and Tile calorimeters (Edm). The constructed ANN procedures exploit as their input vectors the information content of different sets of variables (parameters) which describe particular features of the hadronic shower of an event in ATLAS calorimeters. It was shown that application of ANN procedures allows one to reach 40% reduction of the Edm reconstruction error compared to the conventional procedure used in ATLAS collaboration. Impact of various features of a shower on the precision of $Edm$ reconstruction is presented in detail. It was found that longitudinal shower profile information brings greater improvement in $Edm$ reconstruction accuracy than cell energies information in LAr3 and Tile1 samplings

Study of the Transition Effect with the ATLAS Tile Calorimeter

With the aim to establish the electromagnetic energy scale of the ATLAS Tile calorimeter and understanding the performance of the calorimeter to electrons 12% of modules have been exposed in electron beams with various energies. On a basis of the obtained electromagnetic calibration constants we have determined the e/mip values in dependence of the absorber thickness using different beam incident angles. We have observed the transition effect (e/mip < 1) and, for the first time, its behaviour as a function of the absorber thickness --- the e/mip ratio decreases logarithmically when the absorber thickness increases this is well described by the GEANT4 version 6.2 Monte Carlo simulation. These results are important for precision electromagnetic energy scale determination for the ATLAS Tile calorimeter

Production of (super)heavy quarkonia and new Higgs physics at hadron colliders

Based on the two Higgs doublet model, we study the effect of Higgs-boson exchange on the (super)heavy quarkonium \bar QQ, which induces a strong attractive force between a (super)heavy quark Q and an antiquark \bar Q. An interesting application is the decay of (super)heavy quarkonia \bar QQ into a Higgs boson associated with gauge bosons. The criterion for making the \bar QQ bound state is studied. We also show that non-perturbative effects due to gluonic field fluctuations are rather small in such a heavy quark sector. Possible enhancement for productions and decays of \bar QQ bound states made from the fourth generation quark Q is discussed for \bar p p (at the Tevatron) and pp (at the LHC) collisions.Comment: 18 pages, REVTeX, 9 figures. V2: minor changes, references and acknowledgments adde

A PMT-Block test bench

The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called {\it PMT-Block}. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a {\it 3-in-1} card, which provides shaping, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block test bench has been developed for this purpose. This test bench is a system which allows fast, albeit accurate enough, measurements of the main properties of a complete PMT-Block. The system, both hardware and software, and the protocol used for the PMT-Blocks characterisation are described in detail in this report. The results obtained in the test of about 10000 PMT-Blocks needed for the instrumentation of the ATLAS (LHC-CERN) hadronic Tile Calorimeter are also reported.Comment: 23 pages, 10 figure

Electromagnetic Cell Level Calibration for ATLAS Tile Calorimeter Modules

We have determined the electromagnetic calibration constants of 11% TileCal modules exposed to electron beams with incident angles of 20 and 90 degrees. The gain of all the calorimeter cells have been pre-equalized using the radioactive Cs-source that will be also used in situ. The average values for these modules are equal to: for the flat filter method 1.154+/-0.002 pC/GeV and 1.192+/-0.002 pC/GeV for 20 and 90 degrees, for the fit method 1.040+/-0.002 pC/GeV and 1.068+/-0.003 pC/GeV, respectively. These average values for all cells of calibrated modules agree with the weighted average calibration constants for separate modules within the errors. Using the individual calibration constants for every module the RMS spread value of constants will be 1.9+/-0.1 %. In the case of the global constant this value will be 2.6+/-0.1 %. Finally, we present the global constants which should be used for the electromagnetic calibration of the ATLAS Tile hadronic calorimeter data in the ATHENA framework. These constants are equal to 1.15 pC/GeV in the case of the flat filter method and 1.04 pC/GeV for the fit one

Hadron Energy Reconstruction for the ATLAS Calorimetry in the Framework of the Non-parametrical Method

This paper discusses hadron energy reconstruction for the ATLAS barrel prototype combined calorimeter (consisting of a lead-liquid argon electromagnetic part and an iron-scintillator hadronic part) in the framework of the non-parametrical method. The non-parametrical method utilizes only the known $e/h$ ratios and the electron calibration constants and does not require the determination of any parameters by a minimization technique. Thus, this technique lends itself to an easy use in a first level trigger. The reconstructed mean values of the hadron energies are within $\pm 1$ of the true values and the fractional energy resolution is $[(58\pm3)/\sqrt{E}+(2.5\pm0.3)$. The value of the $e/h$ ratio obtained for the electromagnetic compartment of the combined calorimeter is $1.74\pm0.04$ and agrees with the prediction that $e/h > 1.7$ for this electromagnetic calorimeter. Results of a study of the longitudinal hadronic shower development are also presented. The data have been taken in the H8 beam line of the CERN SPS using pions of energies from 10 to 300 GeV.Comment: 33 pages, 13 figures, Will be published in NIM

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal